Exposed Aggregate Colours in Adelaide: Real Mixes We Have Laid

Choosing between exposed aggregate colours is hard when every swatch is the size of a coaster. A mix that looks warm on a sample board can read grey across a whole driveway, and stone that sparkles up close can blur into one tone from the street. This guide walks through real mixes we have laid around Adelaide, what changes the final look, and how to pick one that suits your home.

Close-up of Highgate exposed aggregate concrete laid by AJ Concrete Services in Adelaide
Highgate by Ideal Mix Concrete on one of our Adelaide driveways. Up close you can see white, black and grey stones, with a few rust and tan ones, in a dark grey base.

Every job we do is wet laid and finished on-site, poured in place as one continuous surface. That matters for exposed aggregate, because the stone is part of the concrete itself, not a coating on top. The mix you choose at the planning stage is the one you will walk and drive on every day.

What are exposed aggregate colours?

Exposed aggregate colours are the overall shades you get when the top layer of cement paste is washed off fresh concrete to reveal the stones in the mix. The colour comes from three things working together: the colours of the stones, the size of the stones, and the colour of the cement base that holds them.

Change any one of those and the finished surface looks different. Concrete suppliers blend and name their own mixes.

Ideal Mix Concrete, which now trades as IMC, is one of the suppliers we use. As of October 2026, its DêKor decorative range page lists a 7/10mm exposed range with more than a dozen named mixes, including Penfold and Woodforde. The same page notes that natural stone varies in colour, texture, size and shape, so some variation can occur from batch to batch.

Real exposed aggregate mixes we have laid in Adelaide

The best way to judge a mix is on a finished job, not a brochure. Here are four mixes from our own work, all supplied by Ideal Mix Concrete. The descriptions below come from what you can see in our photos, so treat them as a guide and always check a real sample.

Woodforde

Woodforde appears more than once in our recent work. We laid it on a driveway with 10mm stone, and on a new home we described in our own post as featuring “the iconic Woodforde exposed aggregate mix”. Up close it shows white, grey and black stones with the odd tan one in a dark base. From a few metres back the stones blend into a deep, even grey.

Woodforde exposed aggregate concrete at a new home, laid by AJ Concrete Services in Adelaide
Woodforde exposed aggregate at a new home. Saw-cut joints divide the panels, and the stone runs right to the edge beside the lawn.

Penfold (salt and pepper)

Penfold is the classic salt and pepper exposed aggregate look. On the driveway in our photo, lots of white and light grey stones are speckled with black in a lighter, sandy base. The result is a brighter surface that still has plenty of texture, which makes it a good fit if you want a lighter driveway without going plain.

Penfold salt and pepper exposed aggregate driveway laid by AJ Concrete Services in Adelaide
Penfold (salt and pepper) by Ideal Mix Concrete on a long Adelaide driveway, with a straight saw-cut joint running down the middle.

Highgate

Highgate, shown in the close-up at the top of this page, has a darker base with a busier spread of white, black, grey and a few rust-coloured stones. It has more contrast than Penfold, so the stone stands out clearly even from standing height. That job was pumped into place by Spincon.

Devonshire

Devonshire is shown here on a side path that we cut, washed and sealed. The photo shows white and grey stones, with a few blue-grey ones, in a dark base. The sealer gives the surface a slightly deeper, richer tone than an unsealed finish.

Devonshire exposed aggregate path, cut, washed and sealed by AJ Concrete Services
A Devonshire exposed aggregate side path, cut, washed and sealed, running along the side of the house.

What changes the look of exposed aggregate

Two driveways in the same named mix can still look different. These are the factors that shift the final colour and texture:

  • Stone colour. The blend of stones sets the overall tone, from bright salt and pepper through to darker grey mixes.
  • Stone size. Smaller stone, like the 10mm in our Woodforde driveway, gives a finer, more even texture. Larger stone looks bolder.
  • Base colour. The cement between the stones covers a lot of the surface, so a lighter or darker base changes how the same stones read.
  • Wash depth. How much paste is washed away decides how much of each stone shows. A light wash shows less stone and a heavier wash shows more texture.
  • Sealing. A sealer can change the finish. Dulux, for example, says its Avista exposed aggregate sealer “provides a wet look finish”.
  • Wet or dry. Every mix looks darker when wet, so look at a sample both ways before you decide.

Sealing exposed aggregate: the wet look and the trade-off

Exposed aggregate can be sealed, and many owners like the way a sealer brings out the colour of the stone. The Dulux Avista exposed aggregate sealer datasheet says that product protects exposed aggregate concrete from dirt ingress.

There is a trade-off. As of October 2026, the same datasheet warns that sealing exposed aggregate on an incline “may cause the surface to become slippery, particularly when wet”, and that slip resistance varies with the size and shape of the aggregate. It also notes that slip resistance additives are available.

If your driveway is steep, raise this before the job starts. For more detail, read our guide on what exposed aggregate sealing is.

Charcoal smudge: a darker look without exposed stone

Not everyone wants visible stone. A smudge finish has no exposed stone. On our jobs it gives a smoother surface with a soft, swirled pattern across each panel. We have used charcoal from Ideal Mix Concrete for smudge work, including a large charcoal driveway.

Charcoal concrete driveway with a smudge finish by AJ Concrete Services in Adelaide
A charcoal driveway in a smudge finish. Each panel has a soft swirled pattern, with smooth borders along the joints.

If you are still weighing up plain, coloured, exposed aggregate or smudged concrete, our guide on how to choose the right concrete finish for your home compares them side by side.

How to choose the right exposed aggregate colour

  1. See it on a real job. A sample helps, but a finished driveway shows how the mix looks at full size. Our Instagram, @ajconcreteservices, shows every mix in this post on real Adelaide jobs.
  2. Check it wet and dry. Splash some water on a sample so you know both looks.
  3. Match the house. Hold the sample against your roof, render, brick and garage door. A light mix like Penfold sits differently against red brick than a darker mix like Woodforde.
  4. Think about the whole area. A colour that looks fine on a small sample can feel different across a double driveway. If you are adding paths around the house, decide whether they should match.
  5. Allow for natural variation. The supplier notes some variation from batch to batch, so expect small differences from any sample.

Choosing your finish is step two of our process, straight after the site visit. That way you make the call with the same crew who will pour and finish the job.

“We recently had our new build driveway done in exposed aggregate and we couldn’t be happier with the result. The finish looks amazing and really lifts the whole front of the house. The team was professional, easy to deal with, and completed the job on time. The quality of workmanship is excellent and everything was left clean and tidy.”

– Shorsh Abdallah, Google review

Ready to pick your exposed aggregate colour?

Exposed aggregate colours come down to stone colour, stone size, base colour and sealing, and the surest way to choose is to see a mix on a finished job. We offer free, no-obligation quotes across Adelaide, and the same crew looks after your job from the first site visit to the final finish. Call 0429 426 991 or request a quote online, and see more of our work on our concrete driveways in Adelaide page.

Google Reviews
5.0
Excellent
Based on 12 reviews
Scroll to Top